Difficult-to-Cut Metals-Conprofe Technology Group Co., Ltd.

Cases by Materials

Hard-Brittle Materials Composite Materials Difficult-to-Cut Metals

Cases by Industries

Semiconductors Aviation & Aerospace Medical Automotive Consumer Electronics

Cases by Machine Tools

Engraving & Milling Centers Vertical 5-Axis Machining Centers 5-Axis Gantry Machining Centers Graphite Machining Centers Lightweight Vertical 5-Axis Machining Centers

Engine Air Inlet

Material: 3D Printed Titanium Alloy

Machine Tool: MHT-4010

Industry: Aviation & Aerospace

Solution: Ultrasonic Machining System

Features: Pyramid Face Machining

Benefits: Higher machining precision without spark spattering; Cycle time reduced by 50%, from 220 min to 110 min; Tool life increased by 3 times, from 8 pieces to 32 pieces; No machining burrs, saving manual costs

Plummer Block Housing

Material: Cast Superalloy (K4169)

Machine Tool: MTM-1500

Industry: Aviation & Aerospace

Solution: Ultrasonic Machining System

Features: Outer Circle and Inner Hole Turning

Benefits: Roughness reduced by 81%, from Ra 0.333μm to Ra 0.062μm; Tool wear reduced by 31% vs. traditional machining at the same condition

Flight Engine Chiller Endplate

Material: 304 Stainless Steel

Machine Tool: UGT-500

Industry: Aviation & Aerospace

Solution: Ultrasonic Machining System

Features: 3,180 D2x30mm Deep Hole Drilling (Dx15)

Benefits: Cycle time reduced by 31.8%, from 330s to 225s per hole; Tool life increased by 63 times, from 50 holes to 3,180 holes; Qualified hole dimension

2 3 4